Security Access Console 50 Pre-wire
The SAC50 is for the job that gets everything later.
The SAC50 is very inexpensive and is perfect for multiple unit condo's and such.
Install this SAC50 in a pre-wire job so that you will have an illuminated doorbell button until the SAC100 or SAC200 can be installed.
The SAC50 is also great for the contractor who is installing our SAC's in multiple units and is waiting for the occupants to decide what options they want in their SAC's. Once they decide you can order it and install it using the SAC50’s rough-in box. Then you can use the SAC50 console and doorbell button on the next job.
The SAC50 can even be painted to match the color of the home or business.
What’s included:

• (1) SAC50 Faceplate. (4.5” wide x 8” tall x .25” thick)
• (1) Rough-in Box (4” wide x 7.5” tall x 3” deep) (Model# RIB100)
• (1) Illuminated Doorbell Button (Silver or Gold)
• (25”) Self Sticking Foam Gasket Material (Model# FG25)
• (2) Stainless steel phillips console screws
• (2) Clip Nuts
  

Rough In Box 100 The RIB100 is the rough-in box that comes with every Security Access Console. The unit has holes on both sides for easy mounting in any framing application. This rough-in box is designed to be sunk into the wall to provide a surface mount for you SAC.

Rough In Box 200 The RIB200 is our rough-in box for block, brick and poured concrete walls. This rough-in box is designed to be sunk into the wall to provide a surface mount for you SAC.

Rough In Box 300 The RIB300 is our rough-in box for block, brick and poured concrete walls. This specially designed rough-in box is perfect for outside walls. It has a built in rain shield to keep the sun and rain off of your SAC.

Surface Mount Box 100 The SMB100 is our surface mount box for use when a rough-in box is not an option. The SMB100 screws directly to any surface and can be easily sealed with calk.

Standing Pole Enclosure 100 The SPE100 is our standing pole enclosure that is used to enclose the SAC100 or 200 at a gate or driveway application. The enclosure has enough room to house all of our SAC models including, camera, microphone, speaker, Essex illuminated keypad and controller. Iincludes (1) SPE100, (4) Anchor Bolts, (4) Nuts, (4) Washers, (2) Hinged Standoffs.

Standing Pole Enclosure 100 Mounting Plate The SPE100MP is used with the SPE100. It is buried in wet concrete at the time of construction as a template for the base of the SPE100. This item is a steel plate template and 4 j-bolts attached with a hole punched out in the middle. It is designed for you or the contractor to install it when the concrete is being poured. Just bury it up to the steel plate and level it with the conduit protruding up from the hole on the middle. Includes (1) Mounting Plate, (4) J Bolts, (4) Nuts, (4) Washers

Standing Pole Enclosure 200 The SPE200 is our standing pole enclosure that is used to enclose the SAC100 or 200 at a gate or driveway application. The enclosure has enough room to house all of our SAC models including, camera, microphone, speaker, Essex illuminated keypad and controller board. Includes (1) SPE200, (2) Hinged Standoffs